Moobile Solution

:::: Nokia X2-01 Format And Factory Reset Method ::::

Heres the Nokia X2-01 Reset code if you wanted to restore back the device to its original factory default settings. This is only advisable if you experience some error problems regarding applications installed on the phone and you want to wipe it out. .
Nokia X2-01Soft Reset
This will return back your X2-01 to its factory setting :

1. Dial or Key in *#7780#
2. Press Ok/Yes

This soft reset mode will not delete/harm your important data or applications, it simply restore the .ini files of the Nokia X2-01 ROM

Hard Reset Nokia X2-01:

1. Dial or Key in *#7370#
2. Press OK/Yes

Another alternative method you can try it if both method mentioned above not working. The method is pressing and holding down button *+3+Yes button right after your phone is turned on.

Samsung Galaxy S2 I9100 Full Shorted Water Damaged And Low Jumper Solution

Samsung Galaxy S2 I9100 water damage and sometimes low quality

charger create full short circuit here is the solution.

Well toady I’m going to tell you you how to undo (recall ) your e-mail messages from your gmail account, I can understand that some time when you get frustrated with someone and going to send him/her mail that contains you anger and frustration then immediately you remember to add/remove something or remembered that you have put something wrong in that message, and don’t want it to be delivered, then this post will help you a lot

Instruction:

Go to your GMAIL id

Under ‘Lab’ tab you will find many option but you here you need to choose the ‘Undo Send’ like below picture and enable it and finally click the ‘Save Change’ Button and save the changes.

Now go to your Gmail account and compose a mail option and write Your Mail and send it, after sending the mail you’ll be prompt by Gmail that ‘Your message has been Sent’ with Undo and View message option.Click on Undo if you want to don’t want the message to be sent.

Note : This option appears only for 10 Seconds.

Today I am telling you about how to Schedule your Facebook Status or Twitter tweets. It means that you will set date and time then automatically on your given time the status will be update.So let come that how we can do that…

Instructions:

Go to THIS WEBSITE
Now Select Facebook or Twitter and login with your Facebook or twitter account .It depends on you which status you want to update.

After signing in you will see another page in which to set your time zone i.e: if you are from Pakistan then set Asia/Karachi or from India then set Asia/Calcutta and so on, select your own region and then click on Next.

Click on Schedule and you are done…
Have fun…

Yes that’s true you can recharge your mobile phone battery without charger for a limited time.

It is really annoying when you are away from home and your phone battery goes empty.
If you are not carrying the charger the situation is more worse. What will you do if you have to make a call from your phone.
There is an easy way without having to recharge the batteries charged. Although it did not last long as in the case, but for such cases we can call to simply provide some important news.
You do this by removing the battery from the phone and then rub and rub with hands or to a shirt or your pants for 3-5 minutes.

After a bit of heat, insert the battery into the phone and make an important phone call immediately because the battery life is usually only lasted two minute.The fact behind this is that when the battery is kept in a cool place the faster the battery capacity will be reduced.

If you do this in a rather cold battery condition, battery life time will usually be much longer. May be useful.

Try All Unlocking Codes for Samsung Mobile After Posted of many other mobile codes. Check them how many works for you. Here are also codes for resetting your phones and All secret Tricks.

*2767*688# = Unlocking Code
*#8999*8378# = All in one Code
*#4777*8665# = GPRS Tool
*#8999*523# = LCD Brightness
*#8999*3825523# = External Display
*#8999*377# = Errors
#*5737425# = JAVA Something{I choose 2 and it chrashed}]
*#2255# = Call List
#*536961# = Java Status Code
#*536962# = Java Status Code
#*536963# = Java Status Code
#*53696# = Java Status Code

#*1200# = AFC DAC Val
#*1300# = IMEI
#*1400# = IMSI
#*2562# = ??? White for 15 secs than restarts.
#*2565# = ChAeck Blocking
#*3353# = Check Code
#*3837# = ??? White for 15 secs than restarts.
#*3849# = ??? White for 15 secs than restarts.
#*3851# = ??? White for 15 secs than restarts.
#*3876# = ??? White for 15 secs than restarts.
#*7222# = Operation Typ (Class C GSM)
#*7224# = I Got !! ERROR !!
#*7252# = Oparation Typ (Class B GPRS)
#*7271# = Multi Slot (Class 1 GPRS)
#*7274# = Multi Slot (Class 4 GPRS)
#*7276# = Dunno
#*7337# = EEPROM Reset (Unlock and Resets Wap Settings)
#*2787# = CRTP ON/OFF
#*3737# = L1 Dbg data
#*5133# = L1 Dbg data
#*7288# = GPRS Attached
#*7287# = GPRS Detached
#*7666# = SrCell Data
#*7693# = Sleep Act/DeAct (Enable or Disable the Black screen after doing nothing for a while)
#*7284# = Class : B,C or GPRS
#*2256# = Calibration Info
#*2286# = Battery Data
#*2527# = GPRS Switching (set to: class 4, class 8, class 9 or class 10)
#*2679# = Copycat feature (Activate or Deactivate)
#*3940# = External loop test 9600 bps
#*4263# = Handsfree mode (Activate or Deactivate)
#*4700# = Half Rate (Activate or Deactivate)
#*7352# = BVMC Reg value
#*8462# = Sleeptime
#*2558# = Time ON
#*3370# = EFR (Activate or Deactivate)
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep
#*7462# = SIM phase
#*7983# = Voltage/Frequenci (Activate or Deactivate)
#*7986# = Voltage (Activate or Deactivate)
#*8466# = Old time
#*2255# = Call ???
#*5187# = L1C2G trace (Activate or Deactivate)
#*5376# = ??? White for 15 secs than restarts.
#*6837# = Official Software Version
#*7524# = KCGPRS
#*7562# = LOCI GPRS
#*7638# = RLC allways open ended TBF (Activate or Deactivate)
#*7632# = Sleep mode Debug
#*7673# = Sleep mode RESET
#*2337# = Permanent Registration Beep
#*2474# = ???
#*2834# = Audio Path
#*3270# = DCS support (Activate or Deactivate)
#*3282# = Data (Activate or Deactivate)
#*3476# = EGSM (Activate or Deactivate)
#*3676# = Flash volume formated
#*4760# = GSM (Activate or Deactivate)
#*4864# = Dunno doesn’t work on newer versions
#*5171# = L1P1
#*5172# = L1P2
#*5173# = L1P3
#*7326# = Accessory (I got Vibrator)
#*7683# = Sleep variable (
#*7762# = SMS Brearer CS (Activate or Deactivate)
#*8465# = Time in L1
#*9795# = wtls key
#*2252# = Current CAL
#*2836# = AVDDSS Management (Activate or Deactivate)
#*3877# = Dump of SPY trace
#*7728# = RSAV done# (Everything went to standart but nothing was deleted)
#*2677# = ARM State (None or Full Rate)
*#8999*636# = Have no clue what it is, i see 20 lines
*#9999# = Software version
*#8999*8376263# = HW ver, SW ver and Build Date
*#8888# = HW version
*#8377466# = Same HW/SW version thing
*#7465625# = Check the locks
*7465625*638*Code# = Enables Network lock
#7465625*638*Code# = Disables Network lock
*7465625*782*Code# = Enables Subset lock
#7465625*782*Code# = Disables Subset lock
*7465625*77*Code# = Enables SP lock
#7465625*77*Code# = Disables SP lock
*7465625*27*Code# = Enables CP lock
#7465625*27*Code# = Disables CP lock
*7465625*746*Code# = Enables SIM lock
#7465625*746*Code# = Disables SIM lock
*7465625*228# = Activa lock ON
#7465625*228# = Activa lock OFF
*7465625*28638# = Auto Network lock ON
#7465625*28638# = Auto Network lock OFF
*7465625*28782# = Auto subset lock ON
#7465625*28782# = Auto subset lock OFF
*7465625*2877# = Auto SP lock ON
#7465625*2877# = Auto SP lock OFF
*7465625*2827# = Auto CP lock ON
#7465625*2827# = Auto CP lock OFF
*7465625*28746# = Auto SIM lock ON
#7465625*28746# = Auto SIM lock OFF
*2767*3855# = E2P Full Reset [/B]
*2767*2878# = E2P Custom Reset
*2767*927# = E2P Wap Reset
*2767*226372# = E2P Camera Reset
#*6420# = MIC Off
#*6421# = MIC On
#*6422# = MIC Data
#*6428# = MIC Measurement
#*3230# = Trace enable and DCD disable
#*3231# = Trace disable and DCD enable
#*3232# = Current Mode
#7263867# = RAM Dump (On or Off)
*2767*49927# = Germany WAP Settings
*2767*44927# = UK WAP Settings
*2767*31927# = Netherlands WAP Settings
*2767*420927# = Czech WAP Settings
*2767*43927# = Austria WAP Settings
*2767*39927# = Italy WAP Settings
*2767*33927# = France WAP Settings
*2767*351927# = Portugal WAP Settings
*2767*34927# = Spain WAP Settings
*2767*46927# = Sweden WAP Settings
*2767*380927# = Ukraine WAP Settings
*2767*7927# = Russia WAP Settings
*2767*30927# = GREECE WAP Settings
*2767*73738927# = WAP Settings Reset
*2767*49667# = Germany MMS Settings
*2767*44667# = UK MMS Settings
*2767*31667# = Netherlands MMS Settings
*2767*420667# = Czech MMS Settings
*2767*43667# = Austria MMS Settings
*2767*39667# = Italy MMS Settings
*2767*33667# = France MMS Settings
*2767*351667# = Portugal MMS Settings
*2767*34667# = Spain MMS Settings
*2767*46667# = Sweden MMS Settings
*2767*380667# = Ukraine MMS Settings
*2767*7667#. = Russia MMS Settings
*2767*30667# = GREECE MMS Settings
*335# = Delete all MMS Messages
*663867# = Dump Mm file
#*536961# = WAPSAR enable / HTTP disable
#*536962# = WAPSAR disable / HTTP enable
#*536963# = Serial eable / Others disable
#*53696# = Java Download Mode
#*5663351# = Wap Model ID [Your Model]
#*5663352# = Wap Model ID [SEC-SGHXXXX/1.0]
#*566335# = Wap Model ID [SEC-SGHXXXX/1.0]
*2767*66335# = Check on which model it is
*2767*7100# = SEC-SGHS100/1.0
*2767*8200# = SEC-SGHV200/1.0
*2767*7300# = SEC-SGHS300/1.0